Many users may still have a lot of questions about the operation of the electric trolley. There are some operational problems that need to be noticed in order to ensure that the operation is better when the trolley is in use. So what should everyone pay attention to?
One: The electric trolley has been inspected and debugged before leaving the factory, so all the technical indicators have reached the design requirements. When in use, it is not necessary for everyone to adjust the hydraulic and electrical systems, just connect the power supply. .
2: Before using the electric trolley, the user should check the certification of its hydraulic and electrical systems, and only after confirming that there is no leakage or bare leakage in these systems can be used.
3: When using an electric trolley, it is necessary to ensure that the four legs of the device are firmly supported on a solid ground. The application safety can be guaranteed only when the device itself is in a stable state.
Four: When using the electric trolley on a daily basis, it is necessary to run it 1-3 times in a dry run, and load operations can only be carried out after the dry run has no abnormalities in the A line. At the same time, the center of gravity of the load should be ensured as much as possible during use. In the center of the workbench.
What problems should be paid attention to when using electric trolleys
Before the electric trolley is officially used, the user must conduct a detailed inspection of the equipment to see if there is any wear on its rollers, intermediate shafts and bearings, cylinder pins and bearings, boom hinge shafts and bearings, etc., only to ensure it The operation can only be carried out if it is in a good state that can be used immediately.
Secondly, when the electric trolley is used, the user also needs to pay attention to filling some parts of the equipment with some lubricating oil, which can not only extend the service life of the bearing, but also better guarantee its use effect.
Finally, in addition to the above-mentioned aspects, users also need to pay attention to the oil quality and oil level of the hydraulic oil when using the electric trolley. If the lifting platform is raised all the way, the hydraulic floor should be 40-50 mm higher than the bottom of the box. If the hydraulic oil is found to be dark, sticky, or there are foreign objects such as grit, it should be replaced in time.
After everyone pays attention to these problems when operating the electric trolley, they can use the electric trolley better. So as to improve your work efficiency, and better complete the use of trolleys.